Tools

Sky High Car Audio 1/0 Cable Cutter

Make every install easier with the 1/0 Cable Cutters/Strippers from Sky High Car Audio Cuts any wire 1/0 and under OFC or CCA Strips down to 16 Gauge wire  A handy tool to have laying around!      

Sky High Car Audio Crimper

How many different crimpers have you bought looking for the right one? Look no further! The Sky High Car Audio Crimpers are the end all solution  Not only are these one of the most durable sets on the market there are also...

Steve Meade SMD DD-1

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and...

SMD VM-1 Volt Meter 12v

Monitor the condition of your battery and charging system.  Some might consider the VM-1 to be over-built; we think it is just right. Some features of the design are: •White LED Backlight •Mil spec FR4 circuit board •Regulated...

SMD DD-1 AND CC-1 Combo Pack

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly...

Sky High Car Audio 4/0 Cable Cutter

Make every install easier with the 2/0 Cable Cutters from Sky High Car Audio Cuts any wire 4/0 and under Tinned OFC, OFC or CCA A handy tool to have laying around when installing that big Sky High wire!  

SMD CROSSOVER CALIBRATOR CC-1

The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to...

SMD DD-1+ Distortion Detector Plus

The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed...

SMD AMM-1

The purpose of this tool is to enable the user to: Measure True Amplifier Power output into any load reactive or resistive Measure Common DC voltages Measure DC voltage drops during quick transients on cable runs or battery / charging...

SMD OM-1 LED Amplifier Output Meter

SMD OM-1 LED Amplifier Output MeterMonitor the Output of your Amplifier.  Calibrate with our DD-1 to know when you are reaching clipping.Some might consider the OM-1 to be over-built; we think it is just right. Some features of the design are:Mil...

SMD (2) OM-1 LED Output Meter Combo

SMD (2) OM-1 COMBO Package Amplifier Output Meter - OM-1 Output MeterMonitor the Output of your Amplifier.  Calibrate with our DD-1 to know when you are reaching clipping.Some might consider the OM-1 to be over-built; we think it is just right. Some...