Product Description
Sky High Car Audio SPL-M-12.1 Amplifier Strapping Module & Balanced Line Driver
Take control of your multi-amplifier car audio system with the Sky High Car Audio SPL-M-12.1 Balanced Line Driver and Amplifier Strapping Module. Designed for high-output car audio and SPL applications, the SPL-M-12.1 combines balanced RCA signal distribution, centralized amplifier control, and flexible amplifier linking in one compact module.
Featuring 12 balanced RCA output channels and three selectable operating modes, this module supports up to 12 amplifiers, depending on the configuration. Whether you’re distributing RCA signals to multiple independent amplifiers, linking amplifiers for centralized control, or managing physically strapped amplifier pairs, the SPL-M-12.1 provides the flexibility needed for complex car audio installations.
Built-in gain, subsonic, low-pass crossover, and phase adjustments allow you to fine-tune your entire amplifier system from one central location. Pair it with the SHCA Smart Bass Knob SBKv1 (sold separately) for convenient system control.
THREE OPERATING MODES
The SPL-M-12.1 Balanced Line Driver features three selectable operating modes, allowing it to accommodate different multi-amplifier car audio configurations.
STRAP MODE – AMPLIFIER STRAPPING CONTROL
Designed for high-output systems using physically strapped amplifier pairs, Strap Mode supports up to six amplifier pairs, allowing you to control as many as 12 amplifiers through a single RCA input.
Connected amplifiers share the same gain, crossover, and phase settings, providing centralized adjustment across the entire strapped amplifier system.
PASS MODE – 12-CHANNEL RCA SIGNAL DISTRIBUTION
Use the SPL-M-12.1 as a powered RCA distribution module to send your audio signal to multiple independent amplifiers.
Pass Mode distributes the input signal across all 12 RCA output channels, supporting up to six amplifiers using two-channel RCA inputs. Each amplifier operates independently using its standard speaker output connections.
This configuration is ideal for installations requiring centralized RCA signal distribution without physically strapping amplifiers together.
LINK MODE – MULTI-AMPLIFIER CONTROL
Link Mode allows you to control up to 12 amplifiers operating independently in Slave Mode.
All connected amplifiers share the module’s gain, crossover, and phase adjustments, allowing you to make system-wide changes from a single control location using the compatible bass knob.
Unlike Strap Mode, the amplifiers are not physically strapped together. Each amplifier maintains its own standard speaker output configuration.
IMPORTANT: Strap Mode requires matching, strappable amplifiers. Follow the specified speaker-output wiring configuration. The negative speaker terminals are used exclusively for the strapping connection and must never be connected to either subwoofer lead. Always follow the amplifier manufacturer’s strapping instructions.
BUILT-IN CAR AUDIO SIGNAL PROCESSING
The SPL-M-12.1 features integrated signal adjustment controls, allowing you to manage important audio settings from one central location instead of adjusting each amplifier individually.
- Adjustable Gain: Centralized gain adjustment for connected amplifiers.
- Subsonic Filter: Adjustable from 5–30 Hz to control low-frequency signals below your desired operating range.
- Low-Pass Crossover: Adjustable from 50–250 Hz to control the upper frequency range sent to your amplifiers.
- Phase Adjustment: Variable 0–180-degree phase control for system tuning.
These integrated controls simplify system adjustments and help maintain consistent settings across multiple amplifiers.
SMART BASS KNOB COMPATIBILITY & SYSTEM MONITORING
The SPL-M-12.1 is compatible with the SHCA Smart Bass Knob SBKv1 (sold separately), providing convenient centralized control of your amplifier system.
When paired with compatible SHCA Series amplifiers and the SBKv1, the system can also support voltage and temperature monitoring.
For installations using multiple amplifiers, the owner’s manual recommends connecting the CAT6 input to the amplifier experiencing the highest operating temperature. This allows the bass knob display to reflect the highest temperature reading in the system.
The integrated remote output also supports coordinated power on/off operation between the module, connected amplifiers, and compatible bass knob.
ADDITIONAL FEATURES
- 2-channel RCA audio input
- 12-channel balanced RCA signal output
- Three selectable operating modes: Pass, Link, and Strap
- Supports up to 12 amplifiers in Link Mode
- Supports up to 12 amplifiers in Strap Mode (six strapped pairs)
- Supports up to six amplifiers in Pass Mode using two-channel RCA inputs
- Integrated gain, subsonic, low-pass crossover, and phase adjustments
- Adjustable subsonic filter from 5–30 Hz
- Adjustable low-pass filter from 50–250 Hz
- Adjustable phase control from 0–180 degrees
- 8 AWG power input terminal
- Compatible with SHCA Smart Bass Knob SBKv1 (sold separately)
- Remote output for coordinated system power control
- Includes 1-meter CAT6 cable
- Operating voltage: 10–16V
- Maximum voltage: 17V
TECHNICAL SPECIFICATIONS
|
Specification |
Details |
|
Model |
SHCA-SPL-M-12.1 |
|
Product Type |
Balanced Line Driver & Strapping Module |
|
RCA Input |
2-Channel |
|
RCA Outputs |
12-Channel Balanced |
|
Operating Modes |
Pass, Link, Strap |
|
Operating Voltage |
10–16V |
|
Maximum Voltage |
17V |
|
Subsonic Filter |
5–30 Hz |
|
Low-Pass Filter |
50–250 Hz |
|
Phase Adjustment |
0–180° |
|
Power Input |
8 AWG |
|
Maximum Amplifier Support |
12 |
|
Bass Knob Compatibility |
SHCA SBKv1 |
|
Included Cable |
1-Meter CAT6 |
|
Warranty |
1-Year Manufacturer Defect Warranty |
WHAT’S INCLUDED
- (1) Sky High Car Audio SPL-M-12.1 Balanced Line Driver & Amplifier Strapping Module
- (1) 1-Meter CAT6 Cable
Build a cleaner, more controlled multi-amplifier car audio system with the Sky High Car Audio SPL-M-12.1 Balanced Line Driver and Strapping Module.