DS18 - JVOCE Marine Roll Cage Sound Bar Tower Sound System with 2 X PRO-HY6.4B Included for Boats, Atv and Jeeps
$459.95
Out of stock
DS18 JVOCE8 Marine Roll Cage Sound Bar Tower Sound System with 2 X PRO-HY8.4B Included - For Jeep, Boat, Golf Cart and ATV.
$599.95
DS18 JVOCE8 Marine Roll Cage Sound Bar Tower Sound System
with 2 X PRO-HY8.4B Included - For Jeep, Boat, Golf Cart and ATV.
As the leaders in Jeep Audio, DS18 is back with the ultimate tower system designed to bring high powered audio to Jeep’s everywhere!
The JVOCE8 Roll Cage Pod encloses two of our loudest water resistant Hybrid Speakers: the PRO-HY8.4B, a high powered speaker with a high intensity driver built into its frame! The inclusion of this high compression horn increases the range of frequencies this speaker reproduces to as high as 20KHz.
The combination of the midrange ferrite motor and tweeter neodymium motor is built specifically to allow them to get louder than your usual tower speakers and perform at a higher rate of efficiency for intense sessions that never end!
The JVOCE8 is designed with extremely durable mold injected plastic to withstand the worst of the elements and outlast any build it’s installed into. The plastic grill helps protect your Hybrid Speakers and has RGB LED’s strung around the inside for easy mood matching!
These Pro Audio speakers can handle RMS Power of 500W, which is about 4 times more than a traditional pod speaker. Traditional water resistant speakers have to make sacrifices for loudness and sensitivity to achieve the waterproof rating, where the JVOCE’s do not.
Mount these speakers almost anywhere with DS18’s highly functional pole clamps for installation onto Roll Bars or Mounting Tubes, or use our Flat Mount for even more mounting options.
LED-BTC SOLD SEPARATELY
Made for light water use, not direct exposure to submersion or pressure washing!
Highlights
- Two water resistant extremely loud PRO-HYBRID 8 inch speakers with built in driver for amazing sound quality and intense volume levels
- Highly durable mold injected plastic tower box mounted through clamps or with included flat mounts
- Built in LED RGB (Controlled Through LED-BTC RGB Controller)
- IP65 Waterproof Rating
Great For
- Jeep Audio
- Marine Audio
- ATV Audio
- Golf Cart Audio
- DIY Projects
Download JVOCE8 Product Manual 
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | Dual 8" / 211mm |
| Nominal Impedance | 4+4 Ohms |
| RMS Power Handling | 2X250w |
| MAX Power Handling | 2X500w |
| Sensitivity (1w/1m) | 99dB |
| Frequency Response | 60Hz-20KHz |
| Recommended HI Pass Crossover | 80Hz |
| BODY / FEATURES | |
| Enclosure Material | High density plastic molded with color injected |
| Marine Grade Type | IP65 + UV Protected |
| RGB LED | YES, Around the Grill |
| Grill Type | Plastic ABS injected |
| Pair | NO |
| Clamps | 2 x Die-Cast Flat Bracket for Jeep JL Roll Cage or universal fit, 2 x Tube Clamp Adjustable (2"~3") 360 Degree Rotation Mounting, Buried Wire or Open Wire Mounting Optional, Included NBR Pad And Stainless Hardware (Screws, Stop Washers, Hexagon wrench, Safety Rope, Thread locker Glue) |
| Front Logo | Yes |
| Finish | Matte Black |
| Input Wire | Speaker x 2 (stereo configuration) + RGB Lights |
| WOOFER SPECIFICATIONS | |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Cone Material | Waterproof Paper |
| Surround Material | Cloth |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 27 Oz |
| DRIVER SPECIFICATIONS | |
| Voice Coil Diameter | 1" / 25.4mm |
| Type | High Compression Horn |
| Diaphragm Material | Titanium |
| Magnet Material | Neodymium |
| Crossover | 6 dB/Oct Filter |
| Horn Diameter | 3" / 76.2mm |
| ENCLOSURE MEASUREMENT | |
| Overall Width | 19.44" / 494mm |
| Overall Depth | 6.41" / 163mm |
| Overall Height (without Clamp) | 10.11" / 257mm |
Description
DS18 JVOCE8 Marine Roll Cage Sound Bar Tower Sound System
with 2 X PRO-HY8.4B Included - For Jeep, Boat, Golf Cart and ATV.
As the leaders in Jeep Audio, DS18 is back with the ultimate tower system designed to bring high powered audio to Jeep’s everywhere!
The JVOCE8 Roll Cage Pod encloses two of our loudest water resistant Hybrid Speakers: the PRO-HY8.4B, a high powered speaker with a high intensity driver built into its frame! The inclusion of this high compression horn increases the range of frequencies this speaker reproduces to as high as 20KHz.
The combination of the midrange ferrite motor and tweeter neodymium motor is built specifically to allow them to get louder than your usual tower speakers and perform at a higher rate of efficiency for intense sessions that never end!
The JVOCE8 is designed with extremely durable mold injected plastic to withstand the worst of the elements and outlast any build it’s installed into. The plastic grill helps protect your Hybrid Speakers and has RGB LED’s strung around the inside for easy mood matching!
These Pro Audio speakers can handle RMS Power of 500W, which is about 4 times more than a traditional pod speaker. Traditional water resistant speakers have to make sacrifices for loudness and sensitivity to achieve the waterproof rating, where the JVOCE’s do not.
Mount these speakers almost anywhere with DS18’s highly functional pole clamps for installation onto Roll Bars or Mounting Tubes, or use our Flat Mount for even more mounting options.
LED-BTC SOLD SEPARATELY
Made for light water use, not direct exposure to submersion or pressure washing!
Highlights
- Two water resistant extremely loud PRO-HYBRID 8 inch speakers with built in driver for amazing sound quality and intense volume levels
- Highly durable mold injected plastic tower box mounted through clamps or with included flat mounts
- Built in LED RGB (Controlled Through LED-BTC RGB Controller)
- IP65 Waterproof Rating
Great For
- Jeep Audio
- Marine Audio
- ATV Audio
- Golf Cart Audio
- DIY Projects
Download JVOCE8 Product Manual
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | Dual 8" / 211mm |
| Nominal Impedance | 4+4 Ohms |
| RMS Power Handling | 2X250w |
| MAX Power Handling | 2X500w |
| Sensitivity (1w/1m) | 99dB |
| Frequency Response | 60Hz-20KHz |
| Recommended HI Pass Crossover | 80Hz |
| BODY / FEATURES | |
| Enclosure Material | High density plastic molded with color injected |
| Marine Grade Type | IP65 + UV Protected |
| RGB LED | YES, Around the Grill |
| Grill Type | Plastic ABS injected |
| Pair | NO |
| Clamps | 2 x Die-Cast Flat Bracket for Jeep JL Roll Cage or universal fit, 2 x Tube Clamp Adjustable (2"~3") 360 Degree Rotation Mounting, Buried Wire or Open Wire Mounting Optional, Included NBR Pad And Stainless Hardware (Screws, Stop Washers, Hexagon wrench, Safety Rope, Thread locker Glue) |
| Front Logo | Yes |
| Finish | Matte Black |
| Input Wire | Speaker x 2 (stereo configuration) + RGB Lights |
| WOOFER SPECIFICATIONS | |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Cone Material | Waterproof Paper |
| Surround Material | Cloth |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 27 Oz |
| DRIVER SPECIFICATIONS | |
| Voice Coil Diameter | 1" / 25.4mm |
| Type | High Compression Horn |
| Diaphragm Material | Titanium |
| Magnet Material | Neodymium |
| Crossover | 6 dB/Oct Filter |
| Horn Diameter | 3" / 76.2mm |
| ENCLOSURE MEASUREMENT | |
| Overall Width | 19.44" / 494mm |
| Overall Depth | 6.41" / 163mm |
| Overall Height (without Clamp) | 10.11" / 257mm |
Reviews (0)
Be the first to write a review
Be the first to write a review
Additional info
SKU:
DS18-JVOCE8
Condition:
New
Shipping:
Calculated at Checkout
Related products
DS18 PRO Universal 8" Plastic Speaker Grill Cover (Pair)
$18.95
PRO-GTW8 8" Car Audio Universal Speaker Grill Cover with Bullet Tweeter Built- in, Set of 1
$79.95
Out of stock
PRO-ZT8 PRO 8" 2-WAY MIDRANGE WITH BUILT IN BULLET TWEETER 275 RMS
$94.95
PRO GM8 8" MIDRANGE LOUDSPEAKER 8 OHM 580 WATTS
$34.95