Digital Tools

Steve Meade SMD DD-1

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and...

SMD VM-1 Volt Meter 12v

Monitor the condition of your battery and charging system.  Some might consider the VM-1 to be over-built; we think it is just right. Some features of the design are: •White LED Backlight •Mil spec FR4 circuit board •Regulated...

SMD DD-1 AND CC-1 Combo Pack

The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector. The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly...

SMD DD-1+ Distortion Detector Plus

The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed...

SMD CROSSOVER CALIBRATOR CC-1

The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to...

SMD AMM-1

The purpose of this tool is to enable the user to: Measure True Amplifier Power output into any load reactive or resistive Measure Common DC voltages Measure DC voltage drops during quick transients on cable runs or battery / charging...

Sparked Innovations 18ft Extension Cable

Make installation easy and grab one of these handy snap connectors specifically designed for the Sparked Innovations line of relay boxes. We offer 18ft lengths to meet your wire running needs. Why strip, solder, heat shrink, and wrap when you can snap...

SMD TM-1 LED Amplifier Temperature Meter Fan Controller

Product Spec: 3 speed fan drive system (PWM) Operating voltage range for power supply 8v-22vdc Display range 30 - 220 F Fan set point range 40 - 200 F Maximum fan load 5 amps DC 2.75" x 2.75" x 0.6" depth

SMD OM-1 LED Amplifier Output Meter

SMD OM-1 LED Amplifier Output MeterMonitor the Output of your Amplifier.  Calibrate with our DD-1 to know when you are reaching clipping.Some might consider the OM-1 to be over-built; we think it is just right. Some features of the design are:Mil...

DS18 Noise Filter

DS18 NF1   Noise Filter Designed exclusively for discerning car audio enthusiasts like you, DS18’s NF1 is designed to take your audio experience to exhilarating new heights. Say goodbye to pesky interference noise and unlock the...

SMD Combo Pack VM-1 Volt Meter and OM-1 Output Meter

Product Spec VM-1: Input Range: 6v - 20.2v Voltage Reading Range: 12.6v - 20.2v Accuracy +/- 0.20v due to nature of bar graph 100% Analog circuitry allows for near instantaneous voltage accuracy versus a traditional digital voltage meter Response...

SMD IM-SG+ (Impedance Meter / Signal Generator PLUS)

    Some Uses: Precision AC Impedance Meter - Frequency range: 10hz-20khz All New Auto-lock feature does the stopping (top or bottom) for you!  Low, Mid, High frequency range for more precision. New, Super smooth...