Product Description
SMD PNC-4 (Positive Negative Combo - 4 Spot)
Get the SMD Quad Fuse Holder & the SMD Half Block Distribution Bar in ONE!
SMD Quad ANL Fuse Block
Protect your vehicle from the dreaded "Car-B-Q" with this product. Whether you have a demanding aftermarket sound system or other aftermarket/auxiliary accessories such as lighting, winches, air pumps etc, it is critical you add a fuse as close to the battery as possible to protect from fire and catastrophic damage due to a short circuit.
Made 100% in the U.S.A. at SMD HQ, this industrial strength ANL fuse holder looks as great as it performs. Milled from HDPE, using metals from Aluminum, Stainless Steel, & Copper and a 3/16" Clear Acrylic cover to top it off! (to help protect from accidental contact with live terminals.
This unit was designed withstand the elements and to last many years of service anywhere you decide to install it! With this being our high temperature model, it is recommended to mount this under the hood (engine compartment). However, you can still mount it in the cabin, or trunk. Also suitable for marine applications, these parts will not corrode!
*Recommended mounting location within 18" of power source (ie front battery, alternator or any auxiliary battery bank)
SMD Half Power/ Ground distribution block
Clean up your messy wiring and prevent engine noise with this easy to use bus bar/distribution block. Using a 3/4" HDPE Body, a 1/4" Aluminum Bus bar, 3/16" Clear Acrylic cover and all Stainless Steel hardware, this high-quality product is all you need to install multiple amplifiers (and other 12v Devices) to one central location. Available in both half block (6 ring terminal spots) or a "Split Block" (12 Ring terminal locations). It can be used as a grounding block or positive distribution. Accepts any ring terminal with 5/16" Hole
Made in California, USA!
