Reinforced Cone Structure

The cone structure of this subwoofer uses a highly rigid cone made with MICA injected molded resin which creates a rigid and durable cone, giving it the ability to produce accurate bass.

Shallow Compact Design

Our line of shallow subwoofers are designed to provide wider installation options for a broad range of vehicles. These shallow-mount subwoofers feature multiple patent-pending features to deliver the big bass performance of a full-size subwoofer, but in a compact design that can be installed either behind or under seats depending on the type of vehicle. The mounting depth is just 3-1/2" - less than half a typical subwoofer in this class.

What’s in the Box

• One 12" Subwoofer
• Trim ring
• Eight 1-1/8" Screws
• Adhesive backed foam gasket
• Manual (English/ German/ French/ Spanish/ Portuguese/ Italian/ Russian)
• Warranty information
• Enclosure recommendations printed on the box

  KEY FEATURES

  • System TypeComponent Subwoofer
  • Sensitivity (1W/1m)88dB
  • Frequency Range20 Hz to 1 kHz
  • CTA-2031 CompliantYes
  • Warranty1 Year
  • Continuous Power handling (RMS) - Watts400 Watts
  • Maximum Peak Power Handling - Watts1500 Watts
  • Nominal Impedance - OHM4
  • Speaker GrillSold separately (UD-12GL)

  BUILD

  • Shape: Round
  • Size: 12"
  • Cone MaterialIMPP - Composite
  • Center Cap Material: ABS
  • Surround Material: Rubber
  • Surround TypeRolled
  • Basket Material: Stamped Metal
  • Magnet Material: Ferrite
  • Magnet Weight: 71.6 oz
  • Voice Coil Type: Single Voice
  • Voice Coil Bobbin: Kapton
  • Voice Coil wire: Copper
  • Damper Poly Cotton
  • Gasket: PP
  • Wire Terminals: Push Type
  • Unit Size (Dimensions): 12-1/2"
  • Mounting Depth: 3-1/2"
  • Cut Out dimensions: 11-1/8"
  • Equivalent Compliance (VAS) [L]45.6
  • Free Air Resonance (Fs) [Hz]31
  • Total Speaker "Q" (Qts)0.54
  • Linear Excursion (Xmax) [mm]8.8
  • Recommended Sealed Box Volume [L]22.6
  • Port Box volume [L]22.6
  • Port Length: 5-7/8"
  • Port Diameter: 3"