null class="page-product logo-position-left infinite-scroll-enabled catalog-page " data-currency-code="USD" >
lock plus

DS18 - EXL-P2000X1D 1-Channel Class D Car Amplifier 2000 Watts RMS 1-Ohm Made In Korea

DS18
$399.95

The EXL-P series Amplifiers are made from the ground up to be your best choice for pure and uninterrupted power for your audio system. The optimized Korean circuitry is made of the highest-grade components available to produce massive power levels for your Subwoofers, Midranges, or Tweeters. The sleek design is made with a very strong heatsink casing and thermal protection circuitry that maintains amp temperature to well below thermal limits giving you extended longevity and high efficiency. The included bass knob along with the precise filters on the amplifier will help you tune the signal to the perfect frequencies you desire effortlessly. The EXL-P2000X1 D Class Monoblock amplifier is conservatively rated at 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.


Highlights

The EXL-P2000X1D Class D Monoblock amplifier 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.

High Quality Korean components and optimized circuitry help attain massive power levels at maximum efficiency giving louder and deeper bass.

Our precise filters will help you adjust to your desired frequencies or box tuning easily. Low Pass filter: 35hz-250hz / Subsonic filter: 10hz-30hz / 0–180-degree phase / Bass boost: 0-9 DB.

The included Bass knob will let you adjust your bass as you drive easily with the turn of your fingertips which also includes power and clipping indicator so you can monitor your signal and amplifier status.

Includes a wide voltage operational range of 9-15.5 volts with gain sensitivity adjustable from 200mv to 6v through the high-quality tiffany RCA jacks.

Large power and ground 1/0 inputs with 8-gauge speaker input terminals. We recommend a 250 inline fuse for this amplifier for optimal operation.

 

RMS Power @ 4 Ohm 800W x 1CH
RMS Power @ 2 Ohm 1400W x 1CH
RMS Power @ 1 Ohm 2000W x 1CH
Frequency Response 15Hz-250Hz
Signal/Noise Ratio >98dB
Efficiency@4 0hm >87%
Damping Factor 200
THD % <0.02%
Low Level Input Range 200MV-6V
Selectable X-Over LPF Fixed
X-Over Filter Range 35Hz - 250Hz
Bass Boost Range 0-+9dB
Bass Boost Frequency 30Hz - 60Hz
Infrasonic Filter 10Hz - 30Hz
Phase Selector 0-180
Class D (Digital)
Amplifier Type Monoblock Subwoofer
Channels 1CH
Minimum Impedance 1 Ohm
Led Indicator PWR / CLIP / PROTECT
Power Input Size 0 AWG
Fuse Rating 250A
Remote Level Control Yes - Dash Mount
Cooling Fan No
Thermal Protection Yes >75°C / 167°F
Over-Load Protection Yes
Dc Output Protection Yes
Short Circuit Output Protection Yes
Voltage Input Protection Yes >15.5V
Clipping Protection Yes
Body Color / Finish Black Aluminum
Dimensions LxWxH (Inches)(mm) 12.67 x 8.77 x 2.67” / 322 x 223 x 68 mm
Heatsink Length 11" / 280mm

 

EXL-P2000X1D Product Manual 

 

https://youtu.be/fJQO-uouZGA

 

 

 

 

 

Read more
Current stock 5
Add to wishlist

Description

The EXL-P series Amplifiers are made from the ground up to be your best choice for pure and uninterrupted power for your audio system. The optimized Korean circuitry is made of the highest-grade components available to produce massive power levels for your Subwoofers, Midranges, or Tweeters. The sleek design is made with a very strong heatsink casing and thermal protection circuitry that maintains amp temperature to well below thermal limits giving you extended longevity and high efficiency. The included bass knob along with the precise filters on the amplifier will help you tune the signal to the perfect frequencies you desire effortlessly. The EXL-P2000X1 D Class Monoblock amplifier is conservatively rated at 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.


Highlights

The EXL-P2000X1D Class D Monoblock amplifier 2000 watts RMS @ 1 ohm, 1400 watts RMS @2 ohms, and 800 watts RMS @ 4 ohms.

High Quality Korean components and optimized circuitry help attain massive power levels at maximum efficiency giving louder and deeper bass.

Our precise filters will help you adjust to your desired frequencies or box tuning easily. Low Pass filter: 35hz-250hz / Subsonic filter: 10hz-30hz / 0–180-degree phase / Bass boost: 0-9 DB.

The included Bass knob will let you adjust your bass as you drive easily with the turn of your fingertips which also includes power and clipping indicator so you can monitor your signal and amplifier status.

Includes a wide voltage operational range of 9-15.5 volts with gain sensitivity adjustable from 200mv to 6v through the high-quality tiffany RCA jacks.

Large power and ground 1/0 inputs with 8-gauge speaker input terminals. We recommend a 250 inline fuse for this amplifier for optimal operation.

 

RMS Power @ 4 Ohm 800W x 1CH
RMS Power @ 2 Ohm 1400W x 1CH
RMS Power @ 1 Ohm 2000W x 1CH
Frequency Response 15Hz-250Hz
Signal/Noise Ratio >98dB
Efficiency@4 0hm >87%
Damping Factor 200
THD % <0.02%
Low Level Input Range 200MV-6V
Selectable X-Over LPF Fixed
X-Over Filter Range 35Hz - 250Hz
Bass Boost Range 0-+9dB
Bass Boost Frequency 30Hz - 60Hz
Infrasonic Filter 10Hz - 30Hz
Phase Selector 0-180
Class D (Digital)
Amplifier Type Monoblock Subwoofer
Channels 1CH
Minimum Impedance 1 Ohm
Led Indicator PWR / CLIP / PROTECT
Power Input Size 0 AWG
Fuse Rating 250A
Remote Level Control Yes - Dash Mount
Cooling Fan No
Thermal Protection Yes >75°C / 167°F
Over-Load Protection Yes
Dc Output Protection Yes
Short Circuit Output Protection Yes
Voltage Input Protection Yes >15.5V
Clipping Protection Yes
Body Color / Finish Black Aluminum
Dimensions LxWxH (Inches)(mm) 12.67 x 8.77 x 2.67” / 322 x 223 x 68 mm
Heatsink Length 11" / 280mm

 

EXL-P2000X1D Product Manual 

 

https://youtu.be/fJQO-uouZGA

 

 

 

 

 

Reviews (0)

Be the first to write a review

Additional info

SKU: DS18-EXL-P2000X1D
Width: 8.77
Height: 2.67
Depth: 12.67
Shipping: Calculated at Checkout