Subwoofer Description
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat.
The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max.
Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak.
Key Features
• Extremely rigid non-pressed paper cone assembly
• Multilayered polymer foam surround
• Polypropylene dust cover with DC logo
• Triple 8” OD semi cup progressive roll spider
• Extra heavy duty interweaved tinsel lead wire sewn to spider
• Cast aluminum black frame / no invert mount
• FEA analyzed and optimized motor assembly – Fully CNC machined
• Rubber mounting gasket
• Chrome spring loaded push terminals
• 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former 8 Layer Flat Wound
• Rubber magnet cover
T/S Parameters
Sub Size 18"
Mounting Depth 9.5"
Mounting Hole Diameter 16.75
Outside Driver Diameter 18.5"
Weight 36lbs
Magnet Material Ferrite
VC Diameter 3.0" 8 Layer Flat Wound
Displacement .26³ ft
Power Handling RMS/Peak 1500/3000
Impedance (Ohm) D1/D2/D4
Sd 1217cm²
Vas 175.29L
Cms 0.085 mm/n
Mms 427 g
Fs 26.4 Hz
BL 19.18 N/A
Re 3.82 Ohm
Le 3.78mH
Qms 11.82
Qes 0.746
Qts 0.701
Xmax 23.5mm
Ref SPL @ 1 watt 88.2
Suggested Sealed 3.5³ ft
Suggested Ported 5.5³ ft
Description
Subwoofer Description
The Level 4 m3 was designed to take even more power and get even louder than the m2. With fantastic power handling and smashing lows its hard to beat.
The Level 4 sub is a large triple stacked motor with a chrome top plate and T yoke yielding 23.5mm of X-Max.
Furthermore, you get the upgraded triple progressive spiders, cone, surround, 3" coil, cast basket, push terminals and upgraded lead wire sewn to the spider. This sub is rated at 1500w RMS and 3000w peak.
Key Features
• Extremely rigid non-pressed paper cone assembly
• Multilayered polymer foam surround
• Polypropylene dust cover with DC logo
• Triple 8” OD semi cup progressive roll spider
• Extra heavy duty interweaved tinsel lead wire sewn to spider
• Cast aluminum black frame / no invert mount
• FEA analyzed and optimized motor assembly – Fully CNC machined
• Rubber mounting gasket
• Chrome spring loaded push terminals
• 3” Hi-temp Aluminum voice coil wound on black anodized voice coil former 8 Layer Flat Wound
• Rubber magnet cover
T/S Parameters
Sub Size 18"
Mounting Depth 9.5"
Mounting Hole Diameter 16.75
Outside Driver Diameter 18.5"
Weight 36lbs
Magnet Material Ferrite
VC Diameter 3.0" 8 Layer Flat Wound
Displacement .26³ ft
Power Handling RMS/Peak 1500/3000
Impedance (Ohm) D1/D2/D4
Sd 1217cm²
Vas 175.29L
Cms 0.085 mm/n
Mms 427 g
Fs 26.4 Hz
BL 19.18 N/A
Re 3.82 Ohm
Le 3.78mH
Qms 11.82
Qes 0.746
Qts 0.701
Xmax 23.5mm
Ref SPL @ 1 watt 88.2
Suggested Sealed 3.5³ ft
Suggested Ported 5.5³ ft
Reviews (0)
Be the first to write a review