lock plus

B2 Audio Package Deal: (1) B2 Riot 15" D4, Gately Audio 3.5 CF Box, Taramps MD 1200.1 2 Ohm, and 4GA Amp Kit

$870.00
$799.00
(You save $71.00)

RIOT Series Subwoofers

Offering several models from 10″ to 15″ the RIOTS & the latest iteration of EL and IS series got you covered in any aspect. Whether it be, efficient sound quality drivers such as the EL, the all round and acclaimed IS series or the new step up from IS, the RIOT. All subwoofers are made with the same philosophy; More for less.

RIOT Manual

*It is essential that our subwoofers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the subwoofers specs. Once the moving parts have been broken in, the performance of your subwoofer will increase.

 

Taramps MD 1200.1 2 Ohm 

OPERATION CLASS Class D
NUMBER OF CHANNELS 01
MAXIMUM POWER @ 12,6 VDC - 2 OHM: 1200W RMS 
@ 12,6 VDC - 4 OHM: 675W RMS 

INPUT SENSITIVITY 18K OHMS
SIGNAL TO NOISE RATIO >90dB
FREQUENCY RESPONSE 10Hz to 20KHz
CROSSOVER HIGH PASS (HPF) 10Hz ~ 80Hz (-12dB/8ª) Variable
CROSSOVER LOW PASS (LPF) 80Hz ~ Full (-12dB/8ª) Variable
BASS BOOST 0 ~ 10dB Variable Frequency (35 ~ 55)
THERMAL MANAGEMENT (PT) Smart Cooler (Cooler acionado por temperatura ou áudio em 3 velocidades
EFFICIENCY 79%
INPUT IMPEDANCE 10k OHMS
OUTPUT IMPEDANCE 2 OHM
PROTECTION SYSTEM Output Short / High and Low Power Supply
MIN. SUPPLY VOLTAGE 9 VDC
MAXIMUM POWER SUPPLY VOLTAGE 16 VDC
CONSUMPTION AT REST 900mA
MAXIMUM MUSIC CONSUMPTION @ 12,6 VDC: 60A
MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL @ 12,6VDC: 120A
DIMENSIONS (H X W X D) MM 184 x 54 x 177mm
WEIGHT

1,395Kg

 

 

Gately Audio 3.5 CF Box 

  • Kerf cut, slot ported enclosure 1” Baltic Birch 
  • (34” X 15.5” X 19.5”) 48” of port area 
  • Tunes to 35 hz estimated bandwidth of 26--68 hz 
  • Cut to one 15” sub up/port back
  • Cutout 14.125" 

* Boxes may come with small imperfections due to the manufacturing process.

 

4GA SHCA Amp Kit 

Kit comes with:

  • 17ft Power wire
  • 3ft Ground wire
  • 17ft 14ga Remote wire
  • 17ft 2ch RCA
  • SHANLR mini ANL Fuse Holder
  • 1 Fuse
  • Pre Terminated & Shrinked Ends
Read more
Add to wishlist

Description

RIOT Series Subwoofers

Offering several models from 10″ to 15″ the RIOTS & the latest iteration of EL and IS series got you covered in any aspect. Whether it be, efficient sound quality drivers such as the EL, the all round and acclaimed IS series or the new step up from IS, the RIOT. All subwoofers are made with the same philosophy; More for less.

RIOT Manual

*It is essential that our subwoofers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the subwoofers specs. Once the moving parts have been broken in, the performance of your subwoofer will increase.

 

Taramps MD 1200.1 2 Ohm 

OPERATION CLASS Class D
NUMBER OF CHANNELS 01
MAXIMUM POWER @ 12,6 VDC - 2 OHM: 1200W RMS 
@ 12,6 VDC - 4 OHM: 675W RMS 

INPUT SENSITIVITY 18K OHMS
SIGNAL TO NOISE RATIO >90dB
FREQUENCY RESPONSE 10Hz to 20KHz
CROSSOVER HIGH PASS (HPF) 10Hz ~ 80Hz (-12dB/8ª) Variable
CROSSOVER LOW PASS (LPF) 80Hz ~ Full (-12dB/8ª) Variable
BASS BOOST 0 ~ 10dB Variable Frequency (35 ~ 55)
THERMAL MANAGEMENT (PT) Smart Cooler (Cooler acionado por temperatura ou áudio em 3 velocidades
EFFICIENCY 79%
INPUT IMPEDANCE 10k OHMS
OUTPUT IMPEDANCE 2 OHM
PROTECTION SYSTEM Output Short / High and Low Power Supply
MIN. SUPPLY VOLTAGE 9 VDC
MAXIMUM POWER SUPPLY VOLTAGE 16 VDC
CONSUMPTION AT REST 900mA
MAXIMUM MUSIC CONSUMPTION @ 12,6 VDC: 60A
MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL @ 12,6VDC: 120A
DIMENSIONS (H X W X D) MM 184 x 54 x 177mm
WEIGHT

1,395Kg

 

 

Gately Audio 3.5 CF Box 

  • Kerf cut, slot ported enclosure 1” Baltic Birch 
  • (34” X 15.5” X 19.5”) 48” of port area 
  • Tunes to 35 hz estimated bandwidth of 26--68 hz 
  • Cut to one 15” sub up/port back
  • Cutout 14.125" 

* Boxes may come with small imperfections due to the manufacturing process.

 

4GA SHCA Amp Kit 

Kit comes with:

  • 17ft Power wire
  • 3ft Ground wire
  • 17ft 14ga Remote wire
  • 17ft 2ch RCA
  • SHANLR mini ANL Fuse Holder
  • 1 Fuse
  • Pre Terminated & Shrinked Ends

Reviews (0)

Be the first to write a review

Additional info

Width: 36.00
Height: 24.00
Depth: 20.00
Shipping: Free Shipping