The XL SPL is the next generation of DC Audio's most award winning driver. The XL SPL has an added pole vent, redesigned top plate and T yoke, larger magnets wrapped in a stylish motor boot an 8 layer flat wound voice coil, upgraded cone and surround. DC Audio is always looking to make great even better and the XL SPL is again a step in that direction. Anyone looking for a subwoofer that not only sounds great but is a beast in the SPL lanes, look no further, you have found what you have been searching for.
Key Features
• Extremely rigid non-pressed paper cone assembly
• Multilayered polymer foam surround
• Polypropylene dust cover with DC logo
• Triple Stiff 8"OD semi cup progressive roll spiders
• Dual, extra heavy duty interwoven tinsel lead wire
• Cast aluminum black frame / no invert mount
• FEA analyzed and optimized motor assembly – Fully CNC machined
• Rubber mounting gasket
• Chrome spring loaded push terminals
• Dual 0.7, 1.0, 1.4 or 2 ohm 3" 8 Layer Hi-temp Aluminum Coil
• Rubber magnet cover
T/S Parameters
Sub Size 12"
Mounting Depth 9"
Mounting Hole Diameter 11.0"
Outside Driver Diameter 12.5"
Weight 57lbs
Magnet Material Ferrite
VC Diameter 3.0" 8 Layer Flat Wound
Displacement .19³ ft
Power Handling RMS/Peak 2200/4400
Impedance (Ohm) D0.7/D1/D2/D4
Sd 494cm²
Vas 25.77L
Cms 0.08 mm/n
Mms 213.7 g
Fs 38.5 Hz
BL 22.73 N/A
Re 3.98 Ohm
Le 5.2 mH
Qms 12.92
Qes 0.403
Qts 0.391
Xmax 26mm
Ref SPL @ 1 watt 87.5
Suggested Sealed 1.00³ ft
Suggested Ported 1.50³ ft
Description
The XL SPL is the next generation of DC Audio's most award winning driver. The XL SPL has an added pole vent, redesigned top plate and T yoke, larger magnets wrapped in a stylish motor boot an 8 layer flat wound voice coil, upgraded cone and surround. DC Audio is always looking to make great even better and the XL SPL is again a step in that direction. Anyone looking for a subwoofer that not only sounds great but is a beast in the SPL lanes, look no further, you have found what you have been searching for.
Key Features
• Extremely rigid non-pressed paper cone assembly
• Multilayered polymer foam surround
• Polypropylene dust cover with DC logo
• Triple Stiff 8"OD semi cup progressive roll spiders
• Dual, extra heavy duty interwoven tinsel lead wire
• Cast aluminum black frame / no invert mount
• FEA analyzed and optimized motor assembly – Fully CNC machined
• Rubber mounting gasket
• Chrome spring loaded push terminals
• Dual 0.7, 1.0, 1.4 or 2 ohm 3" 8 Layer Hi-temp Aluminum Coil
• Rubber magnet cover
T/S Parameters
Sub Size 12"
Mounting Depth 9"
Mounting Hole Diameter 11.0"
Outside Driver Diameter 12.5"
Weight 57lbs
Magnet Material Ferrite
VC Diameter 3.0" 8 Layer Flat Wound
Displacement .19³ ft
Power Handling RMS/Peak 2200/4400
Impedance (Ohm) D0.7/D1/D2/D4
Sd 494cm²
Vas 25.77L
Cms 0.08 mm/n
Mms 213.7 g
Fs 38.5 Hz
BL 22.73 N/A
Re 3.98 Ohm
Le 5.2 mH
Qms 12.92
Qes 0.403
Qts 0.391
Xmax 26mm
Ref SPL @ 1 watt 87.5
Suggested Sealed 1.00³ ft
Suggested Ported 1.50³ ft
Reviews (0)
Be the first to write a review